Home
About Us
Products
Literature
Training
Support
Contact
Home > Support > Office Based Practices > Installation > Manual Autoclaves
Support
Office Based Practices
Register Your Autoclave
Installation
Manual Autoclaves
Automatic Autoclaves
Cleaning and Maintenance
Instrument Preparation
FAQ
Service and Repair
Operators Manual
Become an Authorized Repair Center
Scientific Division
Manual Autoclaves
Manual Autoclave
  1. Place unit on a sturdy level counter.
  2. Measure out the proper amount of water according to model:
    • The Valueklave 1730M = 10-12oz
    • 2340M, 2540M, 2540MK = 12-15oz
    • 3870M = 24-27oz
  3. Pour the water in through the front door of
    the unit. This water should cover the bottom
    of the chamber up to the grove in the front.
  4. If need be adjust the front leveling feet to
    achieve the necessary pitch.
  5. Fill the Reservoir with distilled water
  6. The unit is ready to operate